Re: yum Segmentation Fault
Posted by Adamba on 2011/9/8 19:10:28
Here's the output of getinfo:
about yum clean all, that was the first thing i tried to do, but i'm still getting segmentation fault.
== BEGIN uname -rmi ==
2.6.18-194.el5PAE i686 i386
== END uname -rmi ==
== BEGIN rpm -qa \*-release\* ==
centos-release-notes-5.5-0
centos-release-5-5.el5.centos
rpmforge-release-0.3.6-1.el5.rf
== END rpm -qa \*-release\* ==
== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Disabled
== END getenforce ==
== BEGIN free -m ==
total used free shared buffers cached
Mem: 8111 503 7607 0 48 384
-/+ buffers/cache: 71 8039
Swap: 2047 0 2047
== END free -m ==
== BEGIN rpm -q yum rpm python ==
yum-3.2.22-33.el5.centos
rpm-4.4.2.3-22.el5
python-2.4.3-43.el5
== END rpm -q yum rpm python ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
mirrors-rpmforge
rpmforge.repo
== END ls /etc/yum.repos.d ==
== BEGIN cat /etc/yum.conf ==
[main]
cachedir=/var/cache/yum
keepcache=0
debuglevel=10
logfile=/var/log/yum.log
distroverpkg=redhat-release
tolerant=1
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum
# Note: yum-RHN-plugin doesn't honor this.
metadata_expire=1h
installonly_limit = 5
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
== END cat /etc/yum.conf ==
== BEGIN yum repolist all ==
./getinfo.sh: line 87: 23098 Segmentation fault yum repolist all
== END yum repolist all ==
== BEGIN egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== END egrep 'include|exclude' /etc/yum.repos.d/*.repo ==
== BEGIN sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== END sed -n -e "/^\[/h; /priority *=/{ G; s/\n/ /; s/ity=/ity = /; p }" /etc/yum.repos.d/*.repo | sort -k3n ==
== BEGIN fdisk -l ==
Disk /dev/cciss/c0d0: 146.7 GB, 146778685440 bytes
255 heads, 63 sectors/track, 17844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 1305 10482381 83 Linux
/dev/cciss/c0d0p2 1306 1566 2096482+ 82 Linux swap / Solaris
/dev/cciss/c0d0p3 1567 17844 130753035 f W95 Ext'd (LBA)
/dev/cciss/c0d0p5 1567 1567 8001 83 Linux
/dev/cciss/c0d0p6 1567 1567 30+ 83 Linux
/dev/cciss/c0d0p7 1588 2439 6835938 83 Linux
/dev/cciss/c0d0p8 2440 17844 123740631 83 Linux
Partition table entries are not in disk order
== END fdisk -l ==
== BEGIN blkid ==
/dev/cciss/c0d0p2: LABEL="SW-cciss/c0d0p2" TYPE="swap"
/dev/cciss/c0d0p1: LABEL="/" UUID="f82fc540-a9b7-4151-925e-e90f0a2e5968" TYPE="ext3"
== END blkid ==
== BEGIN cat /proc/mdstat ==
Personalities :
unused devices: <none>
== END cat /proc/mdstat ==
== BEGIN pvs ==
== END pvs ==
== BEGIN vgs ==
== END vgs ==
== BEGIN lvs ==
== END lvs ==
== BEGIN rpm -qa kernel\* | sort ==
kernel-2.6.18-238.19.1.el5
kernel-headers-2.6.18-194.el5
kernel-PAE-2.6.18-194.el5
kernel-PAE-devel-2.6.18-194.el5
== END rpm -qa kernel\* | sort ==
== BEGIN lspci ==
00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:04.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 4 (rev 13)
00:05.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 (rev 13)
00:06.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 6 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:08.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 8 (rev 13)
00:09.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 (rev 13)
00:0a.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 10 (rev 13)
00:0d.0 Host bridge: Intel Corporation Unknown device 343a (rev 13)
00:0d.1 Host bridge: Intel Corporation Unknown device 343b (rev 13)
00:0d.2 Host bridge: Intel Corporation Unknown device 343c (rev 13)
00:0d.3 Host bridge: Intel Corporation Unknown device 343d (rev 13)
00:0d.4 Host bridge: Intel Corporation 5520/5500/X58 Physical Layer Port 0 (rev 13)
00:0d.5 Host bridge: Intel Corporation 5520/5500 Physical Layer Port 1 (rev 13)
00:0d.6 Host bridge: Intel Corporation Unknown device 341a (rev 13)
00:0e.0 Host bridge: Intel Corporation Unknown device 341c (rev 13)
00:0e.1 Host bridge: Intel Corporation Unknown device 341d (rev 13)
00:0e.2 Host bridge: Intel Corporation Unknown device 341e (rev 13)
00:0e.3 Host bridge: Intel Corporation Unknown device 341f (rev 13)
00:0e.4 Host bridge: Intel Corporation Unknown device 3439 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.3 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
01:00.0 System peripheral: Hewlett-Packard Company iLO3 Slave instrumentation & System support (rev 05)
01:00.1 VGA compatible controller: Matrox Graphics, Inc. Unknown device 0533
01:00.2 System peripheral: Hewlett-Packard Company iLO3 Management Processor Support and Messaging (rev 05)
01:00.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller (rev 02)
02:00.0 Ethernet controller: ServerEngines Corp. Emulex OneConnect 10Gb NIC (be3) (rev 01)
02:00.1 Ethernet controller: ServerEngines Corp. Emulex OneConnect 10Gb NIC (be3) (rev 01)
02:00.2 Mass storage controller: ServerEngines Corp. Emulex OneConnect 10Gb iSCSI Initiator (be3) (rev 01)
02:00.3 Mass storage controller: ServerEngines Corp. Emulex OneConnect 10Gb iSCSI Initiator (be3) (rev 01)
0c:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)
== END lspci ==
== BEGIN lspci -n ==
00:00.0 0600: 8086:3406 (rev 13)
00:01.0 0604: 8086:3408 (rev 13)
00:02.0 0604: 8086:3409 (rev 13)
00:03.0 0604: 8086:340a (rev 13)
00:04.0 0604: 8086:340b (rev 13)
00:05.0 0604: 8086:340c (rev 13)
00:06.0 0604: 8086:340d (rev 13)
00:07.0 0604: 8086:340e (rev 13)
00:08.0 0604: 8086:340f (rev 13)
00:09.0 0604: 8086:3410 (rev 13)
00:0a.0 0604: 8086:3411 (rev 13)
00:0d.0 0600: 8086:343a (rev 13)
00:0d.1 0600: 8086:343b (rev 13)
00:0d.2 0600: 8086:343c (rev 13)
00:0d.3 0600: 8086:343d (rev 13)
00:0d.4 0600: 8086:3418 (rev 13)
00:0d.5 0600: 8086:3419 (rev 13)
00:0d.6 0600: 8086:341a (rev 13)
00:0e.0 0600: 8086:341c (rev 13)
00:0e.1 0600: 8086:341d (rev 13)
00:0e.2 0600: 8086:341e (rev 13)
00:0e.3 0600: 8086:341f (rev 13)
00:0e.4 0600: 8086:3439 (rev 13)
00:14.0 0800: 8086:342e (rev 13)
00:14.1 0800: 8086:3422 (rev 13)
00:14.2 0800: 8086:3423 (rev 13)
00:1c.0 0604: 8086:3a40
00:1c.4 0604: 8086:3a48
00:1d.0 0c03: 8086:3a34
00:1d.1 0c03: 8086:3a35
00:1d.2 0c03: 8086:3a36
00:1d.3 0c03: 8086:3a39
00:1d.7 0c03: 8086:3a3a
00:1e.0 0604: 8086:244e (rev 90)
00:1f.0 0601: 8086:3a18
01:00.0 0880: 103c:3306 (rev 05)
01:00.1 0300: 102b:0533
01:00.2 0880: 103c:3307 (rev 05)
01:00.4 0c03: 103c:3300 (rev 02)
02:00.0 0200: 19a2:0710 (rev 01)
02:00.1 0200: 19a2:0710 (rev 01)
02:00.2 0180: 19a2:0712 (rev 01)
02:00.3 0180: 19a2:0712 (rev 01)
0c:00.0 0104: 103c:323a (rev 01)
== END lspci -n ==
== BEGIN lsusb ==
Bus 006 Device 001: ID 0000:0000
Bus 006 Device 002: ID 03f0:7029 Hewlett-Packard
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
== END lsusb ==
== BEGIN grep net /etc/nsswitch.conf ==
#networks: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files
netmasks: files
networks: files
netgroup: nisplus
== END grep net /etc/nsswitch.conf ==
== BEGIN chkconfig --list | grep -Ei 'network|wpa' ==
NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
== END chkconfig --list | grep -Ei 'network|wpa' ==
about yum clean all, that was the first thing i tried to do, but i'm still getting segmentation fault.
This Post was from: https://www.centos.org/newbb/viewtopic.php?forum=38&topic_id=33153&post_id=142025