My CentOS 5.3 is mount second SATA hard disk(2TB) that connect via SATA-IDE adapter and found problem on ext3 filesystem go read-only after disk usage on disk reach ~700 GB. What is can cause the problem.
Note:
- my computer main board = X9DPA-GG and has 2 IDE , North bridge =ICH3
- first hard disk is IDE 500GB and second hard disk is SATA 2TB connect via SATA-IDE adapter
Problem on ext3 filesystem go read-only
Problem on ext3 filesystem go read-only
File systems that go readonly are almost always caused by underlying hardware problems. You should look in your logs at the first things that happened immediately prior to it going r/o. If your /var filesystem is on the disk with problems then your logs may be incomplete but perhaps running `dmesg | less` will still have enough info in it to be of help.