One of the things I'm concerned about, is my software RAID1 array, because it contains very vital data. I plan to take backup of the most valuable data, but not all of it, because I dont have sufficient storage space for it.
Do you think my RAID disks will work out of the box, when installing Centos7? Obviously it is very important, that they aren't reformatted or anything.
Any suggestions/advices will be appreciated.
Best regards,
Kenneth
more /etc/mdadm.conf
Code: Select all
MAILADDR xxxx@xxxx
DEVICE /dev/sdb1 /dev/sdc1
ARRAY /dev/md0 metadata=1.2 name=mpserver:0 UUID=42363d2c:cd81c7a6:fc398779:6de8dfe3
Code: Select all
UUID=d933dd77-73d4-482c-84c3-0e01ffa02a42 / ext3 defaults 1 1
UUID=f841a34b-13d8-4ed9-a92e-32d01cbc22d2 /boot ext4 defaults 1 2
/dev/md0 /data ext4 defaults,errors=remount-ro 0 1
UUID=7fed6fb4-83b7-46b0-9386-f6f5e319d9f8 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
Code: Select all
Personalities : [raid1]
md0 : active raid1 sdb1[0] sdc1[1]
1953510415 blocks super 1.2 [2/2] [UU]