Adaptec 2940U2 IBM Ult3850 support

Issues related to hardware problems
Post Reply
greg_7
Posts: 3
Joined: 2014/07/22 09:30:26

Adaptec 2940U2 IBM Ult3850 support

Post by greg_7 » 2014/07/22 09:55:23

Hi I have a Dell T105 with an adaptec 2940U2/U2W connected to a IBM ultrium 3850 Lto-2.

I've been running Centos 6.5 no problem tape works fine. I've tried to upgrade to Centos 7 and I can no longer see the tape. Looking at the /proc/scsi it doesn't recognize the scsi card.

I replaced the card with a spare 29320lp which I have. The scsi card appeared to be recognised and the Tape drive detected but showed the Tape drive is identified as a disk!! and I cant access it via the normal tools

Has Centos\rhel 7 dropped support for this HW??

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Adaptec 2940U2 IBM Ult3850 support

Post by TrevorH » 2014/07/22 09:56:41

Probably. Many older "legacy" drivers have been removed from el7 and the 2940 series are now about 10 years old so it's not unlikely.

Google tells me that were around in 2000 so more like 15 years...
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

greg_7
Posts: 3
Joined: 2014/07/22 09:30:26

Re: Adaptec 2940U2 IBM Ult3850 support

Post by greg_7 » 2014/07/22 15:39:06

Thanks for the reply.

Any thoughts on the second configuration.

The Adaptec 29320lp is recognised but the tape IBM Ultrium 3850 is shown as a disk/

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Adaptec 2940U2 IBM Ult3850 support

Post by TrevorH » 2014/07/22 15:42:27

Is it seen as a disk by the on-board Adaptec BIOS configuration? Been a long time since I used one but there's a page there that shows you all SCSI ids and what devices are attached.
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

greg_7
Posts: 3
Joined: 2014/07/22 09:30:26

Re: Adaptec 2940U2 IBM Ult3850 support

Post by greg_7 » 2014/07/22 16:24:51

Hi
I accessed the adaptec Bios and it showed the device as a IBM ULT3850-TD2
I'm assuming the OS recognises it as a a tape or disk... unless the drive has been removed from the list?

Thanks
Greg.

User avatar
TrevorH
Site Admin
Posts: 33202
Joined: 2009/09/24 10:40:56
Location: Brighton, UK

Re: Adaptec 2940U2 IBM Ult3850 support

Post by TrevorH » 2014/07/22 16:43:11

Where is it shown as a disk?
The future appears to be RHEL or Debian. I think I'm going Debian.
Info for USB installs on http://wiki.centos.org/HowTos/InstallFromUSBkey
CentOS 5 and 6 are deadest, do not use them.
Use the FAQ Luke

Post Reply